Design, build and repair across Mumbai · Free site visit & 3D concept +91 96190 04320 · +91 90221 49569
Home/Wardrobe Design/In Vile Parle
Western Suburbs · Vile Parle

Wardrobe Design in Vile Parle

Vile Parle is largely established society stock with a mix of older low-rise and newer redevelopment. Here is what that means for wardrobe design work.

Free site visit in Vile Parle

Measured survey and an itemised quote, at no cost.

No cost, no obligation. We call back within 2 working hours, or reach us on WhatsApp.

Local conditions

Working on wardrobe design in Vile Parle

Vile Parle is largely established society stock with a mix of older low-rise and newer redevelopment. Buildings here tend to have well-organised managing committees and clear documented rules, which makes permissions straightforward but inflexible — working hours are usually enforced strictly. We plan schedules around that rather than assuming extensions will be granted.

We build carcasses in 18 mm BWP 710 grade plywood, edge-banded on all four sides including the hidden ones, because an unsealed edge against a damp wall is where swelling starts. Shutters are your choice of finish; hardware is Hettich or Hafele as standard, with soft-close on every hinge and drawer. Sliding systems run on top-hung tracks rather than bottom rollers, so dust and hair do not jam them. Every unit is scribed to the wall on site — Mumbai walls are rarely plumb, and a factory-square box against an out-of-plumb wall leaves a tapering gap you will see every day.

What we specify

Specification for Vile Parle projects

Carcass18 mm BWP 710 grade plywood (Century, Greenply or equivalent), all edges banded
ShuttersAcrylic, laminate, PU, membrane or veneer — each with a different cost and repair profile
HingesHettich or Hafele soft-close, 110 degree, with 10-year manufacturer warranty
Sliding systemTop-hung track, 60 to 80 kg rated per shutter, with floor guide rather than floor track

Refacing is often the honest answer

If your existing carcass is sound plywood and square, replacing only the shutters and hardware costs roughly 40% of a new wardrobe and gives you the same visual result. We check the carcass at the site visit and tell you which situation you are in. If it is MDF and already swelling at the base, refacing is throwing money at a box that is failing — and we will say that too.

Our process

How a Vile Parle project runs

Free site measurement

We measure the opening at three heights, check wall plumb and note beam or duct intrusions.

Storage audit

A short conversation about what goes in — saris, suits, luggage, bedding — before any layout is drawn.

3D design and layout

You see the elevation and the internal layout, with hanging, shelf and drawer split marked.

Itemised quotation

Carcass grade, shutter finish, hardware brand and internal accessories each priced separately.

Answers

Wardrobe Design in Vile Parle — your questions

Do you work in Vile Parle?

Yes. Vile Parle is largely established society stock with a mix of older low-rise and newer redevelopment. We cover Vile Parle and the surrounding areas, with site inspection typically within 24 to 48 hours of your call.

How quickly can you visit a site in Vile Parle?

Usually within 24 to 48 hours. If you send photographs on WhatsApp beforehand we can often tell you how involved the work is before we arrive, which saves you a visit if it turns out to be something simple.

What does wardrobe design cost in Vile Parle?

It depends on the specification and the condition of what is already there, which is why we measure on site rather than quoting a rate over the phone. The survey and the itemised quotation cost you nothing.

Request a quote in Vile Parle

Free site visit anywhere in Vile Parle

A designer or engineer visits, measures and gives you a written scope and an itemised quotation at no cost.

Call WhatsApp Free visit