Design, build and repair across Mumbai · Free site visit & 3D concept +91 96190 04320 · +91 90221 49569
Home/TV Unit Design/Modern TV Unit
TV Unit Design

Modern TV Unit Design in Mumbai

A floating unit looks lighter. It also has to carry its whole load through the wall behind it.

Free site visit

Measured survey and an itemised quote, at no cost.

No cost, no obligation. We call back within 2 working hours, or reach us on WhatsApp.

Overview

About modern tv unit

The current language is a floating console, a fluted or slatted back panel, concealed backlighting and a minimum of visible hardware. It suits Mumbai living rooms because it keeps the floor clear, which makes a small room read larger.

The structural question comes first. A floating unit transfers everything — its own weight, the television, and whatever gets stacked on it — into the wall. On a 4-inch partition wall, which many flats have, that needs reinforcement or the unit has to take its load to the floor.

Specification

What we specify

Floating fixingSteel bracket into RCC with chemical anchors; partition walls reinforced or load taken to floor
Back panelFluted MDF or solid-wood slats on an 18 mm BWP 710 substrate
Backlighting24V LED behind the panel, driver in an accessible compartment
Service gap50 mm void behind the panel with vertical conduits at both ends
FinishPU, laminate or veneer; fluting in a contrasting tone to the console
Our process

How we run the work

Free site visit

Wall measured and sounded to identify RCC, brick or partition. Existing points mapped.

Equipment and cable plan

We list every device that will live there and plan conduit routes before anything is drawn.

3D concept

You see the elevation in context with the sofa line and the viewing height marked.

Itemised quotation

Carcass, finish, lighting, hardware and electrical work each priced separately.

Answers

Modern TV Unit — questions

Can a floating unit go on any wall?

No. It transfers its full load into the wall, and many Mumbai flats have 4-inch brick or block partitions that will not hold a cantilevered unit plus a television over time. We sound the wall at the site visit. Where it is a partition, we either fix back to the structural slab or design the unit to take its load to the floor.

Is fluting a trend that will date?

Probably, in the same way that every strong visual language does. The practical mitigation is to flute a panel that can be refaced rather than building it into the carcass, so it can be changed in a few years without rebuilding the unit.

Where does the backlight driver go?

In an accessible compartment, never sealed behind the panel. Drivers fail — usually before the LED strip does — and one buried behind a fixed panel means cutting the panel open to replace a part that costs very little.

Free site visit for Modern TV Unit

We survey, measure and give you a written scope and itemised quotation at no cost.

Call WhatsApp Free visit